Sales * Service * Installations 813-443-4876
Cart 0
Precor Discovery Series Selectorized Strength Circuit

Precor

Precor Discovery Series Selectorized Strength Circuit

$ 45,000.00

Precor Discovery Series Selectorized Strength Circuit

This Circuit Includes 1 each of the following:

Seated Leg Curl | Leg Extension | Outer Thigh | Inner Thigh | Glute Extension

Seated Calf Extension | Prone Leg Curl | Shoulder Press | Rear Delt/Pec Fly

Chest Press | Abdominal | Seated Row | Seated Dip | Triceps Extension | Biceps Curl

Frames Precor Black Magic Gloss

Upholstery Precor Slate

MSRP on this Circuit is $64,600.00

Seated Leg Curl Ensuring optimal interaction between user and equipment, the knee pad of the Discovery™ Series Selectorized Line Seated Leg Curl moves with the lower legs – no thigh hold-down panel is required. Start position and roller pads adjust for sound biomechanics. Spring-assisted back pad that adjusts easily from the seated position.Stabilized User PositionThe knee pad helps to support the user in position without the need of additional adjustments and support pads.AdjustmentsLower leg pad and back pad adjustments allow for the unit to fit any userOpen DesignThe Seated Leg Curl features an open design that allows for easy entry, ensuring the user aligns their knee joint with pivot for proper exerciser mechanicsEquipment FeaturesWeight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.The weight stack is elevated to facilitate user pin selection from seated position.Upholstery Premium quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustmentsRatcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional PlacardEasy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Bearings and Pivot Points     Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self-aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder     The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Pulleys and Cables Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish   The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features    Knee pad moves with user's lower legs; no thigh hold-down pad required. Start position and roller pads adjust for optimal exercise mechanics.Equipment SpecificationsIncremental Add-on Weight  5 lbs (2.3 kg)Weight Stack          240 lbs / 109 kgWorkout Area (L x W)66 L x 50 W inches / 168 L x 127 W cmEquipment Dimensions and WeightLength    61 inches / 155 cmWidth      49 inches / 125 cmEquipment Weight 594 lbs / 269 kgHeight 59 inches / 150 cmShipping Dimensions and WeightShipping Weight     645 lbs / 293 kgRegulatory EN957  Yes ASTM               Yes 
Leg Extension
With a spring-assisted back pad that adjusts easily from the seated position, reliability and ease-of-use are evident to users of the Discovery™ Series Selectorized Line Leg Extension. The start position and roller pad adjust for optimal exercise mechanics.Easy Back AdjustmentThe spring-assisted back pad easily adjusts from the seated position so that user can properly set up the unit without leaving the seatPersonalized FitBoth the start position and roller pads easily adjust to ensure the unit fits the user for proper formUser Friendly Weight StackThe weight stack utilizes a simple pin adjustment that users can easily reach from the seated position.Equipment FeaturesWeight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.The weight stack is elevated to facilitate user pin selection from seated position.Upholstery             Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentRatcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional Placard              Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Bearings and Pivot Points     Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self-aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder     The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Pulleys and Cables Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features     Spring-assisted back pad adjusts easily from seated position. Start position and roller pad adjust for optimal exercise mechanics.Equipment SpecificationsIncremental Add-on Weight  5 lb (2.3 kg)Weight Stack          240 lbs / 109 kgWorkout Area (L x W) 66 L x 50 W / 168 L x 127 WEquipment Dimensions and WeightLength    53 inches / 135 cmWidth      49 inches / 125 cmEquipment Weight 575 lbs / 261 kgHeight 59 inches / 150 cmShipping Dimensions and WeightShipping Weight     625 lbs / 283 kgRegulatory EN957  Yes   ASTM Yes 
Outer Thigh
On the Discovery™ Series Selectorized Line Outer Thigh, the user faces the shrouded weight stack for privacy. Easy-to-operate adjustable start position and a slightly reclined back position for comfort and stabilization deliver a positive experience between the user and equipment.
Ratcheting Start PositionThe unique ratchet adjustment allows the user to easily adjust the start position for maximized comfort once in position.PrivacyFor maximum privacy the user faces inward to face the fully shrouded weight stackFoot BarsThe feet rest on foot bars for a comfortable user position and supportEquipment FeaturesWeight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.The weight stack is elevated to facilitate user pin selection from seated position.Upholstery Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustments           Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional Placard              Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Bearings and Pivot Points     Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self- aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder     The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Pulleys and Cables Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features    Easy-to-operate adjustable start position. User faces fully shrouded weight stack for privacy. Slightly reclined back position for comfort and stabilization.Equipment SpecificationsIncremental Add-on Weight  5 lb (2.3 kg)Weight Stack          200 lbs / 91 kgWorkout Area (L x W)           66 L x 55 W inches / 168 L x 139 W cmEquipment Dimensions and WeightLength    66 inches / 168 cmWidth      30 inches / 76 cmEquipment Weight 544 lbs / 247 kgHeight     59 inches / 150 cmShipping Dimensions and WeightShipping Weight     595 lbs / 270 kgRegulatory EN957  Yes ASTM Yes
Inner Thigh
Users of the Discovery™ Series Selectorized Line Inner Thigh appreciate facing the shrouded weight stack for privacy as well as the easy-to-operate adjustable start position. The seat back is slightly reclined for comfort and stabilization.
Ratcheting Start PositionThe unique ratchet adjustment allows the user to easily adjust the start position for maximized comfort once in position.
PrivacyFor maximum privacy, the user faces inward towards the fully shrouded weight stack
Foot BarsThe feet rest on foot bars for a comfortable user position and support.
Equipment FeaturesWeight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.The weight stack is elevated to facilitate user pin selection from seated position.Upholstery             Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustments           Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional Placard              Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self- aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish   The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features     Easy-to-operate adjustable start position. User faces fully shrouded weight stack for privacy. Slightly reclined back position for comfort and stabilization.Equipment SpecificationsIncremental Add-on Weight  5 lb (2.3 kg)Weight Stack          200 lbs / 91 kgWorkout Area (L x W)           66 L x 55 W inches / 168 L x 139 W cmEquipment Dimensions and WeightLength    66 inches / 168 cmWidth      30 inches / 76 cmEquipment Weight 544 lbs / 247 kgHeight     59 inches / 150 cmShipping Dimensions and WeightShipping Weight     595 lbs / 270 kgRegulatory EN957  Yes ASTM               Yes 
Glute Extension
The sound biomechanics of the Discovery™ Series Selectorized Line Glute Extension deliver a unique, targeted workout for the user. Elbow pad, handles and large base platform stabilize the user during exercise and deliver a smooth, flowing and precise motion.Support for Stabilization Elbow pad, handles and large foot platform stabilize the user during exercise.Long Movement Arm The movement arm length provides for maximum hip extension, promoting more glute activation during the exercise.Easy Start Position No adjustments are needed to start this workout. It is a quick start for all users.Equipment Features
Weight Stack
Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.Upholstery
Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustments           
Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional Placard              
Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Bearings and Pivot Points     
Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self-aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder     
The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish   
The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features    
Curvilinear motion path does not require hip alignment. Long movement arm encourages knee extension for full gluteal involvement. Elbow pad, handles and large base platform stabilize the user during exercise.Equipment Specifications
Incremental Add-on Weight  5 lb (2.3 kg)
Weight Stack          160 lbs / 73 kg
Workout Area (L x W)           84 L x 40 W inches / 213 L x 102 W cmEquipment Dimensions and WeightLength    53 inches / 135 cmWidth      40 inches / 102 cmEquipment Weight 448 lbs / 203 kgHeight     59 inches / 150 cmShipping Dimensions and WeightShipping Weight     510 lbs / 232 kgRegulatory EN957  Yes  ASTM              Yes
Seated Calf ExtensionThe Discovery™ Series Selectorized Line Seated Calf Extension allows easy access and enhanced ergonomics for a precisely targeted resistance workout for the calf muscles. The curved foot platform provides a stable and comfortable foundation throughout the complete range of motion.Intuitive Seat DesignThe linear bearing horizontal seat platform is easy to adjust and provides an effective position for all users. The seated position ensures that users direct force properly through their hips.Center-Loaded Foot PlateThe center loaded footplate provides more even resistance on both feet, resulting in smooth movement and decreasing stress on the machine components.Curved Foot PlatformA curved platform accommodates all users and stabilizes the ankles to properly activate calf muscles during the exercise.Equipment FeaturesWeight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.Upholstery             Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustments           Seat assembly is angled to allow gravity to assist in adjusting. Simple pull lever seat adjustment easily slides on linear bearing system. Handles include slip-resistant overmold. Adjustment points are highlighted with a contrasting color for easy identification and use.Instructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone.Bearings and Pivot Points     Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder     The non-slip drink-and-accessory tray is integrated and features large open, even surface area, easily accessible and easy to keep clean.Pulleys and Cables Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish   The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features    Seated user position directs force properly through the user's hips.Multiple foot positions accommodates short and tall users without having to adjust a single foot bar.Equipment SpecificationsIncremental Add-on Weight  10 lbs (4.5 kg)Weight Stack          400 lbs / 180 kgWorkout Area (L x W)           49 L x 49 W inches / 125 L x 125 W cmEquipment Dimensions and WeightLength    53 inches / 134 cmWidth      44 inches / 112 cmEquipment Weight 679 lbs / 308 kgHeight     59 inches / 150 cmShipping Dimensions and WeightLength    53 inches / 135 cmWidth      44 inches / 112 cmHeight     63 inches / 160 cmShipping Weight     696 lbs / 316 kgRegulatoryEN957     YesASTM     Yes 
Prone Leg CurlEasy entry onto the Discovery™ Series Selectorized Line Prone Leg Curl allows users to align their knee joint with the pivot for proper exercise mechanics. The ankle roller pad adjusts for varying leg lengths and ensures smooth, optimal resistance.Open DesignThe Prone Leg Curl features an open design that allows for easy entry, ensuring the user aligns their knee joint with pivot for proper exerciser mechanicsAdjustmentsThe ankle roller pads easily and quickly adjust to match any leg length of the users.Ergonomic Pad DesignThe angled pad helps ensure proper position, minimizing stress on the lower back.Equipment Features Instructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Weight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.The weight stack is elevated to facilitate user pin selection from seated position.Upholstery              Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustments            Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Water Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Bolt Down Capability             YesGeneral Features     Easy entry allows user to align knee joint with pivot for proper exercise mechanics. Ankle roller pad adjusts for varying leg length.Equipment SpecificationsIncremental Add-on Weight  5 lbs (2.3 kg)Weight Stack          200 lbs / 91 kgWorkout Area (L x W)           47 L x 61 W inches / 119 L x 155 W cmEquipment Dimensions and WeightLength    61 inches / 155 cmWidth      48 inches / 122 cmEquipment Weight 497 lbs / 225 kgHeight     59 inches / 150 cmShipping Dimensions and WeightShipping Weight     555 lbs/ 252 kgRegulatory EN957  Yes ASTM               Yes
Shoulder PressThe Discovery Series Selectorized Line Shoulder Press delivers targeted movement with a movement arm that is counter-balanced with a rear-set pivot designed to create a proper motion path and low starting lift weight. The ratcheting gas-assisted seat adjusts to fit a wide range of users.Specifications OverviewThe Discovery Series Selectorized Line Shoulder Press delivers targeted movement with a movement arm that is counter-balanced with a rear-set pivot designed to create a proper motion path and low starting lift weight. The ratcheting gas-assisted seat adjusts to fit a wide range of users.Equipment FeaturesGeneral Features     Movement designed to create optimal motion path. Ratcheting gas-assisted seat adjusts to fit wide range of users. Weight Stack 200 lbs (91 kg).Instructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify.Adjustments            Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat.Upholstery              Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Rubber Feet             YesEquipment SpecificationsWeight Stack          200 lbs / 91 kgAdd-on Weight Stack (lbs / kg)              5 lbs / 2.3 kgWorkout Area (L x W)           89 L x 62 W / 226 L x 158 WWeight Stack(s)Weight Stack(s)      Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.Equipment Dimensions and WeightLength    67 inches / 170 cmWidth      52 inches / 132 cmHeight     59 inches / 150 cmEquipment Weight 538 lbs / 244 kgShipping Dimensions and WeightShipping Weight     580 / 265Regulatory EN957 / ASTM    EN957 ASTM         Yes
Rear Delt/Pec FlyThe Discovery™ Series Selectorized Line Rear Delt / Pec Fly features dual independent-movement arms with upper pivots to accommodate varying arm lengths. Each can be set to 13 starting positions over a 120-degree range. The weight is offset to the right for most convenient access.Multi-PurposeThis unit allows you to provide two traditional movements in one unit. Easy adjustment pins allow users to seamlessly move between pec fly and rear delt movements.Pivoting ArmsThe dual pivoting arms allow for users of different arm lengths to comfortably perform each exercise while maintaining proper form.Independent Movement ArmsIndependent movement arms provide a variety of movements on one unit, while increasing core activity.Equipment FeaturesWeight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.The weight stack is elevated to facilitate user pin selection from seated position.Upholstery              Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustments            Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features     Dual independent-movement arms feature upper pivots to accommodate arm lengths and can be set to 13 starting positions over a 120-degree range. Weight stack offset to user's right for the most convenient access.Equipment SpecificationsIncremental Add-on Weight  5 lb (2.3 kg)Weight Stack          240 lbs / 109 kgWorkout Area (L x W)           82 L x 82 W inches / 208 L x 208 W cmEquipment Dimensions and WeightLength    54 inches / 137 cmWidth      56 inches / 142 cmEquipment Weight 594 lbs / 269 kgHeight     84 inches / 213 cmShipping Dimensions and WeightShipping Weight     655 lbs / 297 kgRegulatory EN957  Yes ASTM               Yes
Chest PressA foot assist bar on the Discovery Series Selectorized Line Chest Press allows the user to begin exercise in an advantageous pre-stretch start position. The movement arm features forward-set low pivot for proper motion path. The ratcheting gas-assisted seat adjusts easily and fits a wide range of users.Specifications OverviewA foot assist bar on the Discovery Series Selectorized Line Chest Press allows the user to begin exercise in an advantageous pre-stretch start position. The movement arm features forward-set low pivot for proper motion path. The ratcheting gas-assisted seat adjusts easily and fits a wide range of users.Equipment Features General Features     Movement arm features forward-set low pivot for proper motion path. Ratcheting gas-assisted seat adjusts to fit wide range of users. Weight Stack 240 lbs (109 kg).Instructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify.Adjustments            Ratcheting seat adjustments require only a lift to release the lever. Handles include slip resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat.Upholstery              Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Rubber Feet             YesEquipment SpecificationsWeight Stack          240 lbs / 109 kgAdd-on Weight Stack (lbs / kg)              5 lbs / 2.3 kgWorkout Area (L x W)           64 L x 59 W / 163 x 150Weight Stack(s)Weight Stack(s)      Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.Equipment Dimensions and WeightLength    58 inches / 147 cmWidth      59 inches / 150 cmHeight     59 inches / 150 cmMachine Weight (base equipment)        530 / 240Shipping Dimensions and WeightShipping Weight     590 / 268Regulatory EN957 / ASTM    EN957 ASTM         Yes
AbdominalThe Discovery™ Series Selectorized Line Abdominal machine enables exercisers to fully isolate the abdominal contraction. The contoured back and elbow pads, along with the foot rest allows users of all sizes to stabilize themselves during exercise.Four Bar Linkage Arm DesignThe linkage design of the arms creates a similar feeling of abdominal contraction, maximizing muscle engagement of the abs during the workout.Elevated Arm PositionThis is the ideal position for proper breathing and muscle contraction during the range of motion.Fixed Foot PlateThe fixed foot plate provides a stable foundation for users of all sizes.Equipment FeaturesWeight Stack          Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.Upholstery              Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustments            Gas -assist ratcheting seat adjustment requires only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 1/4 inch (7""x19"") aircraft cable coated with black pressure-extruded nylon to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish    The frame is 11 gauge (.120 in) 2x4"" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features     Arm, seat and back pad position secures the user and four bar linkage movement arm design maximizes abdominal muscle engagement. Foot brace allows users of all sizes to stabilize themselves during exercise.Equipment SpecificationsIncremental Add-on Weight  5 lb (2.3 kg)Weight Stack          200 lbs / 91 kgWorkout Area (L x W)           54 L x 51 W inches / 137 L x 130 W cmEquipment Dimensions and WeightLength    51 inches / 130 cmWidth      50 inches / 127 cmEquipment Weight 523 lbs / 237 kgHeight     59 inches / 150 cmShipping Dimensions and WeightLength    52 inches / 132 cmWidth      52 inches / 132 cmHeight     61 inches / 155 cmShipping Weight     540 lbs / 245 kgRegulatory EN957  Yes ASTM               Yes
Seated RowThe movement arm of the Discovery™ Series Selectorized Line Seated Row features a low, forward-set pivot for an optimal motion path and positive user experience. Angled triple-grip handles create a wide range of user start positions with no chest pad adjustments needed.Angled Triple-Grip HandlesAngled triple-grip handles allow for a wide range of user start positions with no chest pad adjustments needed.Static Chest PadAlong with easy to enter and exit, the chest pad requires no adjustments to use. It provides optimal user stabilization throughout the movement.Equipment FeaturesWeight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.The weight stack is elevated to facilitate user pin selection from seated position.Upholstery              Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustments            Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features     Movement arm features low, forward-set pivot for optimal motion path. Angled triple-grip handles create wide range of user start positions; no chest pad adjustments needed.Equipment SpecificationsIncremental Add-on Weight  5 lb (2.3 kg)Weight Stack          240 lbs / 109 kgWorkout Area (L x W)           52 L x 49 W inches / 132 L x 124 W cmEquipment Dimensions and WeightLength    51 inches / 130 cmWidth      49 inches / 125 cmEquipment Weight 508 lbs / 230 kgHeight     59 inches / 150 cmShipping Dimensions and WeightShipping Weight     580 lbs / 265 kgRegulatory EN957  Yes ASTM               Yes
Seated DipThe unique linear motion path of the Discovery™ Series Selectorized Line Seated Dip, achieved through narrow and wide handle positions, ensures a targeted workout and correct exercise movement. The forward-angled seat back keeps the user secure.Forward-angled seat backThe angle of the seat back helps ensure a proper and supported position in the machine throughout the whole movement.Wide to Narrow Handle RotationHandles easily rotate from wide to narrow to accommodate all users.Long-lasting Linear BearingsIndustrial grade linear bearings allow for smooth operation of the movement arm and ensure a long time, solid performance of your investment.Equipment FeaturesInstructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Weight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.The weight stack is elevated to facilitate user pin selection from seated position.Upholstery              Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Seat         Fixed, tapered, and contoured seat padWater Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessable and easy to keep clean.Adjustments            Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Bolt Down Capability             YesGeneral Features     Unique linear motion path encourages correct exercise movement with narrow and wide handle positions. Forward-angled seat back keeps users secure in the machine.Equipment SpecificationsIncremental Add-on Weight  5 lb (2.3 kg)Weight Stack          240 lbs / 109 kgWorkout Area (L x W)           48 L x 49 W inches / 121 L x 124 W cmEquipment Dimensions and WeightLength    47 inches / 119 cmWidth      49 inches / 125 cmEquipment Weight 563 lbs / 255 kgHeight     59 inches / 150 cmShipping Dimensions and WeightShipping Weight     580 lbs / 265 kgRegulatory EN957  Yes ASTM               Yes
Triceps ExtensionThe Discovery™ Series Selectorized Line Triceps Extension delivers smooth, precise motion. An angled pad positions users’ arms for maximum comfort and efficiency. The ratcheting gas-assisted seat adjusts easily and fits a wide range of users.Angled Arm PadThe arm pad positions arms for maximum comfort and muscle efficiency, ensuring users get the most out of their workoutGuiding HandlesThe handles of this unit queue user into the optimal position for proper movement form and triceps isolation.Ratcheting SeatThe unique ratchet adjustment fits all users and allows the seat to be easily adjusted from the start position.Equipment FeaturesWeight Stack          Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.Upholstery              Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustments            Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features     Angled pad positions arms for maximum comfort and efficiency. Ratcheting gas-assisted seat adjusts to fit wide range of users.Equipment SpecificationsIncremental Add-on Weight  5 lb (2.3 kg)Weight Stack          160 lbs / 73 kgWorkout Area (L x W)           49 L x 44 W inches / 124 L x 112 W cmEquipment Dimensions and WeightLength    47 inches / 119 cmWidth      44 inches / 112 cmEquipment Weight 442 lbs / 200 kgHeight     59 inches / 150 cmShipping Dimensions and WeightShipping Weight     475 lbs / 215 kgRegulatory EN957  Yes ASTM               Yes
Biceps CurlEase-of-use and reliability are core attributes of the Discovery™ Series Selectorized Line Biceps Curl. The ratcheting gas-assisted seat adjusts to fit a wide range of users. Handle grips are angled for proper exercise mechanics. Contoured arm pad with leading edge allows for optimal support and comfort without restricting proper breathing.Angled HandlesThe angle of the handles ensure user maintains proper hand and arm positioning throughout the range of motion, maximizing muscle engagement.Ratcheting SeatThe unique ratchet adjustment fits all users and allows the seat to be easily adjusted from the start positionAngled Arm PadThe arm pad positions arms for maximum comfort and muscle efficiency, ensuring users get the most out of their workoutEquipment FeaturesWeight Stack         Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.The weight stack is elevated to facilitate user pin selection from seated position.Upholstery              Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.Adjustable Seat        Yes, gas-assisted ratcheting seat adjustmentAdjustments            Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.Instructional Placard               Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.Bearings and Pivot Points      Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.Water Bottle and Accessories Holder      The drink-and-accessory holder features large open, even surfaced area, easily accessable and easy to keep clean.Pulleys and Cables  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.Frame and Finish    The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.Bolt Down Capability             YesGeneral Features     Ratcheting gas-assisted seat adjusts to fit wide range of users. Handle grips angled for proper exercise mechanics.Equipment Specifications Incremental Add-on Weight  5 lb (2.3 kg)Weight Stack          160 lbs / 73 kgWorkout Area (L x W)           49 L x 44 W inches / 124 L x 112 W cmEquipment Dimensions and WeightLength    47 inches / 119 cmWidth      44 inches / 112 cmEquipment Weight 434 lbs / 197 kgHeight     59 inches / 150 cmShipping Dimensions and WeightShipping Weight     470 lbs / 213 kgRegulatory EN957  Yes ASTM               Yes

 

 


Share this Product


More from this collection