Cart 0
Precor Experience Strength™ C-Line Leg Extension C605EC

Precor Experience Strength™ C-Line Leg Extension C605EC

$ 1,499.00

With a spring-assisted back pad that adjusts easily from the seated position, reliability and ease-of-use are evident to users of the C-Line Leg Extension. The start position and roller pad adjust for optimal exercise mechanics.

General Features
Spring-assisted back pad adjusts easily from seated position. Start position and roller pad adjust for optimal exercise mechanics. Weight Stack 260 lbs (119 kg).

Instructional Placard
Step-by-step machine identifier and instructional placards are positioned on the inside of the weight stack for easy reading by user.

Adjustments Ratcheting seat adjustments require only a lift to release the lever.

Handles include slip-resistant rubber sleeves with machined alloy end-caps.

Adjustment points are highlighted with a contrasting color for ease-of-use.

Weight Stack Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish.

Guide rods are precision center-less ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.

Integrated Add-on Weight Yes

Frame and Finish
The frame is 11 gauge (.120 in) 2x4"" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat.

Upholstery
Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.

Pulleys and Cables
Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7""x19"") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.

Bearings and Pivot Points
Over-sized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.

Water Bottle and Accessories Holder The drink-and-accessory holder features machine-identifier graphics on both sides for easy identification and optional circuit numbering.

Rubber Feet Yes

Weight Stack 260 lbs / 119 kg
Workout Area (L x W) 66 x 50 inches / 168 x 127 cm
Length 53 inches / 135 cm
Width 49 inches / 124 cm
Height 67 inches / 170 cm
Equipment Weight 610 lbs / 278 kg

Unit Options

Listed “As is” $1499

If Cleaned and Serviced $1799

If Certified Pre Owned $2299


Share this Product