Cart 0
Precor Experience Strength™ C-Line Seated Row C310EC

Precor Experience Strength™ C-Line Seated Row C310EC

$ 2,299.00

The movement arm of the C-Line Seated Row features a low, forward-set pivot for an optimal motion path and positive user experience. Angled triple-grip handles create a wide range of user start positions with no chest pad adjustments needed.

General Features Movement arm features low, forward-set pivot for optimal motion path. Angled triple-grip handles create wide range of user start positions; no chest pad adjustments needed. Weight Stack 260 lbs (119 kg).
Instructional Placard Step-by-step machine identifier and instructional placards are positioned on the inside of the weight stack for easy reading by user.
Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.
Weight Stack Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.
Integrated Add-on Weight Yes
Frame and Finish The frame is 11 gauge (.120 in) 2x4"" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat.
Upholstery Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
Pulleys and Cables Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7""x19"") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.
Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
Water Bottle and Accessories Holder The drink-and-accessory holder features machine-identifier graphics on both sides for easy identification and optional circuit numbering.
Rubber Feet Yes

Weight Stack 260 lbs / 119 kg
Workout Area (L x W) 52 x 49 inches / 132 x 124 cm
Length 52 inches / 132 cm
Width 49 inches / 124 cm
Height 77 inches / 196 cm
Equipment Weight 565 lbs / 258 kg
 

 


Share this Product